Assembly

The game table consists of the following  pieces:     

  • 4 stands/Legs

  •  Center compartment

  •  Surface/Top Part

  •  Inside game board

  •  Bottom tray

Tools Needed 

  • 8 Wood screws size 8 x 1 3/4( included )

  •  4 Hooks ( included )

  •  4 Short thick wood screws ( included )

 

 

 

 

Installation Steps

Installing the Game Table is very easy:

Step 1:

Start with inserting the hooks one at a time in the designated holes in the lower part of each stand.

Click here
Step 2:

Attach each stand to the center compartment with the long screws

 ( 2 screws for each stand )

 

Click here for more detailed pictures on this step
Step 3:

Lay the tray on the hooks from inside as shown, and then attach the tray from the bottom using the short thick screws and the hooks.

Step 4:

Lay the surface on top by inserting  the long screw ,which is on the bottom side of the surface, inside the center hole as shown below. This will attach the surface to the center compartment and it will let it rotate 90 degree. Also there is a stopper next to it so the table wont rotate more than 90 degree.

The hole
Step 5:

Slide the game board inside the table's surface.

Step 6:

Rotate 90 degrees and open to play.